So you want to manually enter a channel on your hand held radio, but you’ve programmed it using a computer and you don’t have them with you.
What can you do ?<\/p>\n\n\n\n
Easy !<\/p>\n\n\n\n
Go into the ‘menu<\/strong><\/em>‘, Long press and hold whilst in CH Channel Mode WILL NOT WORK<\/strong> on the ht500d, or the RT3s. I know because I’ve tried this !<\/p>\n\n\n\n You can use ‘Program Radio’ to add Tx \/ Rx Frequency, CTCSS\/DCS, Channel Name, Colour Code, Timeslot, Add CH, Time Out Timer, VOX, Mic Level \n\nThis assumes that you have the stored channels on screen in Channel Mode.\n\n<\/p>\n","protected":false},"excerpt":{"rendered":" So you want to manually enter a channel on your hand held radio, but you’ve programmed it using a computer and you don’t have them with you.What can you do ? Easy ! Go into the ‘menu‘, go to ‘utilities‘, go to ‘radio settings‘, go to ‘mode‘ Select ‘MR mode‘, the channel name will become … <\/p>\n
go to ‘utilities<\/strong><\/em>‘,
go to ‘radio settings<\/em><\/strong>‘,
go to ‘mode<\/strong><\/em>‘
Select ‘MR mode<\/strong><\/em>‘, the channel name will become all numbers.
Press and HOLD<\/strong> the ‘back\/red<\/strong>‘ button until there it bleeps.
The memory number will become a ‘V’ instead of a number.<\/p>\n\n\n\n
Digital Only<\/strong> TxContact, Group List. Oddly Colour Code and Timeslot are still in the menu when in Analogue mode. ?!!?<\/p>\n\n\n\n